Leak Detection/Monitoring
Critical Power Group of Northern Virginia is a provider of RLE Technologies leak detection products. The SeaHawk line of leak detection products protects your entire facility against potential conductive fluids before they become catastrophic. The SeaHawk leak detection systems reduce costly repairs and minimize down time by receiving immediate, flexible, and redundant notification.
If Critical Power Group can fulfill your leak detection needs, please fill in your contact information in the Request a Quote Section or Contact our Northern Virginia Headquarters at (703) 443-1717 and we will be happy to help you. Below you will find information on each of the leak detection products we offer.
| RLE Technologies Leak Detection Product Overview Brochure | |
| RLE Technologies Water Leak Detection, Facilities Monitoring Systems & Integration Solutions Brochure |
RLE Technologies LD2100 Leak Detection Monitor
| The LD2100 is a distance read leak detection system. It detects and provides the location of any conductive fluid problems. It can identify disconnects or breaks in the sensing cable to decrease false alarms. The LED flashing system alerts the presence of a leak. This system can accommodate up to 5000 feet of sensing cable. |
RLE Technologies SeaHawk Leak Detection Accessories
|
The LD-ENC is designed for use with RLE’s LD1500 & LD2000 Distance Read Panels. The enclosure simplifies installation requiring conduit connections and can accommodate 100/120/230-240VAC.
The SeaHawk X-Connector (X-CON) allows branching of our SeaHawk Water Leak Detection Cable (SC) and SeaHawk Non-Sensing Cable (NSC). With one input, one output, and two branch lines, the X-CON resolves the common dilemma of multi-directional routing of SC. SeaHawk Non-Sensing Cable (NSC) is used to extend a control panel’s leader cable to an area where sensing cable is needed. It also bridges lengths of SeaHawk Water Leak Detection Cable (SC) in areas where sensing is not required. The SeaHawk Leak Detection Cable Evaluator (LDCE) is designed to work specifically with SeaHawk leak detection panels that utilize SeaHawk Leak Detection Cable (SC). The LDCE is used to test and measure the precision of any length of SC. |
RLE Technologies LD5100 Leak Detection Monitor
|
The LD5100 is a distance read leak detection system that identifies the presence and location of a leak. The system can accommodate a continuous run of sensing cable up to 5000 feet. This system comes equipped with a LCD on the front panel to provide easy setup, configuration, and access to current alarms or logs.
The physical location of the leak can then be determined by cross-referencing the distance displayed on the LCD with a cable reference map (FM1114). The LD5100 is self-calibrating and uses internal logging for detailed alarm histories with date and time. |
RLE Technologies LD1500 Leak Detection Monitor
| The LD1500 is designed for integration into an existing management or monitoring system. The LD1500 detects conductive fluids and identifies the distance to the leak. The location can be found by taking the distance to the leak and cross-referencing it to the framed reference map of your facility. The system can monitor up to 1500 feet of sensing cable. |
RLE Technologies LDRA6 Leak Detection Alarm Panel
|
LDRA6 is a multi-zone leak detection alarm panel. It can annunciate alarms from 6 discrete zones when conductive fluids become present. Each input can have up to 1000 feet of sensing cable connected to it.
The LDRA6 uses a wall mount enclosure and a tricolour LED system to easily identify zone status (green for normal, red for alarm and yellow for fault). |
RLE Technologies LD1000 Leak Detection Monitor
|
The LD1000 monitors up to 1000 feet of sensing cable for conductive fluids. This single zone detection panel includes a configurable visible and audible alarm.
As a supervised system, the LD1000 continuously monitors up to 1,000 feet (305m) of sensing cable and/or SeaHawk SD-Z spot detectors (water sensors) for breaks and misconnections. Has a wall mount enclosure and is great for smaller areas and is also environmentally friendly. |
RLE Technologies LD300 Leak Detection Monitor
|
The LD300 monitors up to 300 feet of sensing cable and is typically used for small areas. It is designed for use with RLE patented SeaHawk Water Leak Detection Cable (SC). With adjustable alarm thresholds the LD300 is a single zone system to detect conductive fluid and notify you of issues before it’s too late.
It has a lightweight design and is fast and easy to install. Comes with an LED indicator which will flash if the SC is cut, looses continuity or has a poor connection and will also activate a fault relay in addition to the flashing light. |
RLE Technologies Spot Detectors
| The SeaHawk spot detectors are commonly used to locate water issues in small areas. The spot detectors use 2 polymer-coated sensing probes to detect conductive fluids at a single point. The spot detectors must be connected to a control module. These are a great way to ensure downtime and costly repairs are avoided. |
RLE Technologies SeaHawk Water Leak Detection Cable
|
The SeaHawk water leak detection cable is designed to sense any conductive fluid, dry quickly, and lay flat after installation. It is reliable and eliminates the risk of false alarms with its non-conductive polymers.
The water leak detection cable is easy to install and repair with connectors. This cable cleans simply with a damp cloth. |